PDS logoPlanetary Data System
PDS Information
Find a Node - Use these links to navigate to any of the 8 publicly accessible PDS Nodes.

This bar indicates that you are within the PDS enterprise which includes 6 science discipline nodes and 2 support nodes which are overseen by the Project Management Office at NASA's Goddard Space Flight Center (GSFC). Each node is led by an expert in the subject discipline, supported by an advisory group of other practitioners of that discipline, and subject to selection and approval under a regular NASA Research Announcement.
Click here to return to the Photojournal Home Page Click here to view a list of Photojournal Image Galleries Photojournal_inner_header
Latest Images  |  Spacecraft & Technology  |  Animations  |  Space Images App  |  Feedback  |  Photojournal Search  
Your search criteria found 1962 images
Gallery: Spacecraft and Technology
Go to PIAxxxxx:
Refine this list of images by:
Target:
Mission:
Spacecraft:
Instrument:
Click on an image for detailed information
Click on a column heading to sort in ascending or descending order
My
List		 Addition DateSort Ascending Target Mission Instrument Size
Add Image to Favorite List 2021-06-30 Surface Water and Ocean Topography (SWOT)
 8256x5504x3
Teams from NASA's Jet Propulsion Laboratory and the March Air Reserve Base loaded the scientific payload for the SWOT Earth-observing satellite into a C-17 airplane on June 27. The hardware is headed to a clean room facility near Cannes, France.
PIA24534:
Loading SWOT Into C-17 Aircraft
Full Resolution:     TIFF (96.71 MB)     JPEG (5.911 MB)
Add Image to Favorite List 2021-06-30 Deep Space Atomic Clock (DSAC)
 Deep Space Atomic Clock (DSAC)
 6226x3636x3
NASA's Deep Space Atomic Clock could revolutionize deep space navigation. One key requirement for the technology demonstration was a compact design. The complete hardware package is shown here and is only about 10 inches (25 centimeters) on each side.
PIA24573:
Deep Space Atomic Clock Hardware
Full Resolution:     TIFF (38.2 MB)     JPEG (1.6 MB)
Add Image to Favorite List 2021-06-21 Earth Sentinel-6/Jason-CS
 1536x1024x3
This map shows sea level measured by the Sentinel-6 Michael Freilich satellite from June 5 to15. Red areas are regions where sea level is higher than normal, and blue areas indicate areas where it's lower than normal.
PIA24533:
Sentinel-6 Michael Freilich Sea Surface Height
Full Resolution:     TIFF (1.492 MB)     JPEG (78.4 kB)
Add Image to Favorite List 2021-05-06 Surface Water and Ocean Topography (SWOT)
 8256x5504x3
Project Manger Parage Vaze stands in the JPL clean room where the SWOT satellite is being assembled. The spacecraft will help researchers survey the amount and distribution of Earth's surface water, including lakes and rivers, as well as the ocean.
PIA24531:
SWOT Project Manager Parag Vaze
Full Resolution:     TIFF (82.94 MB)     JPEG (2.592 MB)
Add Image to Favorite List 2021-04-19 Mars Mars Helicopter
 1920x1080x3
A simulation made from data from the first flight of NASA's Ingenuity helicopter, showing the flight from different angles. The flight occurred on April 19, 2021.
PIA24588:
Video Animation Made From Ingenuity's First Flight Data
Full Resolution:     TIFF (2.865 MB)     JPEG (84.21 kB)
Add Image to Favorite List 2021-04-19 Mars Mars Helicopter
 1600x900x3
An altimeter chart shows data from the first flight of NASA's Ingenuity Mars Helicopter, which occurred on April 19, 2021.
PIA24587:
Altimeter Chart for Ingenuity's First Flight
Full Resolution:     TIFF (181.3 kB)     JPEG (71.62 kB)
Add Image to Favorite List 2021-04-06 Mars Helicopter
 8256x5504x3
NASA's Ingenuity Mars Helicopter carries a small swatch of muslin material from the lower-left wing of the Wright Brothers Flyer 1.
PIA24291:
Swatch of Wright Brothers Flyer 1 Attached to Mars Helicopter
Full Resolution:     TIFF (84.43 MB)     JPEG (4.089 MB)
Add Image to Favorite List 2021-04-05 Mars 2020 Rover
 1632x1224x3
Photo of a rover wheel with etched illustration inside, featuring two sets of rover wheel tracks, one straight and one twisted.
PIA24552:
Rover DNA Inscription
Full Resolution:     TIFF (3.884 MB)     JPEG (157.2 kB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 Plasma Instrument for Magnetic Sounding (PIMS)
 9504x6336x3
In this photo, the Plasma Instrument Calibration Chamber at the Johns Hopkins Applied Physics Laboratory in Laurel, Maryland, recreates the plasma environments that PIMS and other instruments will encounter in space.
PIA24330:
Preparing NASA's Europa Clipper's Plasma Instrument
Full Resolution:     TIFF (153.8 MB)     JPEG (9.527 MB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 Europa Imaging System - Wide Angle
 4608x3456x3
Included in the payload of science instruments for NASA's Europa Clipper is the Europa Imaging System (EIS) Wide Angle Camera (WAC).
PIA24329:
Europa Imaging System Wide Angle Camera
Full Resolution:     TIFF (36.57 MB)     JPEG (1.413 MB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 Europa Imaging System - Narrow Angle
 3228x4236x3
Included in the payload of science instruments for NASA's Europa Clipper is the Europa Imaging System (EIS) Narrow Angle Camera (NAC).
PIA24328:
Europa Imaging System Narrow Angle Camera
Full Resolution:     TIFF (41.04 MB)     JPEG (2.058 MB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 Plasma Instrument for Magnetic Sounding (PIMS)
 7750x5209x3
Pictured in a clean room at APL are NASA's Europa Clipper's recently assembled Faraday cup sensors and instrument housings in two configurations.
PIA24327:
Faraday Cups Up Close: NASA's Europa Clipper
Full Resolution:     TIFF (93.79 MB)     JPEG (6.269 MB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 Europa Imaging System - Wide Angle
 4608x3456x3
An engineer at the Johns Hopkins Applied Physics Laboratory (APL) works with an engineering model of part of the Europa Imaging System (EIS) that will fly aboard NASA's Europa Clipper.
PIA24325:
Europa Clipper's Europa Imaging System in the Works
Full Resolution:     TIFF (37.86 MB)     JPEG (1.712 MB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 4032x3024x3
Technicians and engineers at NASA's Jet Propulsion Laboratory work together on Sept. 12, 2019, to bond thermal tubing to a panel built for NASA's Europa Clipper spacecraft by the Johns Hopkins University Applied Physics Laboratory.
PIA24324:
Europa Clipper's Thermal Tubing
Full Resolution:     TIFF (29.65 MB)     JPEG (1.224 MB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 8256x5504x3
Engineers at NASA's Jet Propulsion Laboratory test an engineering model of a high-frequency (HF) radar antenna that makes up part of NASA's Europa Clipper radar instrument on Dec. 17, 2019.
PIA24323:
Europa Clipper REASON Testing on the Mesa
Full Resolution:     TIFF (99.17 MB)     JPEG (3.569 MB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 3828x5735x3
Technicians at NASA's Goddard Space Flight Center check the fit of the cylinders of the propulsion module core of NASA's Europa Clipper spacecraft on Oct. 15, 2020.
PIA24322:
Stacked Cylinders: Europa Clipper Propulsion Module
Full Resolution:     TIFF (64.4 MB)     JPEG (2.936 MB)
Add Image to Favorite List 2021-04-01 Europa Clipper
 3000x2000x3
NASA's Europa Clipper, depicted in this illustration that was updated in December 2020, will swoop around Jupiter on an elliptical path, dipping close to its moon Europa on each flyby to collect data.
PIA24321:
Europa Clipper Spacecraft (Illustration)
Full Resolution:     TIFF (17.63 MB)     JPEG (581.2 kB)
Add Image to Favorite List 2021-03-30 Jupiter Juno
 Stellar Reference Unit (SRU)
 1920x1080x3
This animation gives an X-ray view of the Juno spacecraft's Stellar Reference Unit (SRU) star camera as it is bombarded by high-energy particles in Jupiter's inner radiation belts.
PIA24436:
High Energy and Juno's Stellar Reference Unit
Full Resolution:     TIFF (1.936 MB)     JPEG (131.1 kB)
Add Image to Favorite List 2021-03-29 Psyche
 4176x2784x3
The Solar Electric Propulsion (SEP) Chassis of NASA's Psyche spacecraft is mounted onto a rotation fixture in High Bay 1 of the Spacecraft Assembly Facility at NASA's Jet Propulsion Laboratory in Southern California.
PIA24476:
Chassis of NASA's Psyche Spacecraft Docks Safely
Full Resolution:     TIFF (27.41 MB)     JPEG (970.9 kB)
Add Image to Favorite List 2021-03-29 Psyche
 4176x2784x3
This image, shot March 28, 2021 shows engineers and technicians preparing to move the Solar Electric Propulsion (SEP) Chassis from its shipping container to a dolly in High Bay 1 of JPL's Spacecraft Assembly Facility.
PIA24475:
NASA's Psyche Spacecraft Chassis Welcomed Into JPL's High Bay 1
Full Resolution:     TIFF (24.83 MB)     JPEG (1.067 MB)
Add Image to Favorite List 2021-03-29 Psyche
 4176x2784x3
A major component of NASA's Psyche spacecraft has been delivered to the agency's Jet Propulsion Laboratory in Southern California, where the phase known as assembly, test, and launch operations (ATLO) is now underway.
PIA24474:
NASA's Psyche Spacecraft Chassis Arrives at the Agency's JPL
Full Resolution:     TIFF (23.6 MB)     JPEG (998.3 kB)
Add Image to Favorite List 2021-03-29 Psyche
 10800x7200x3
This illustration, updated as of March 2021, depicts NASA's Psyche spacecraft.
PIA24473:
Psyche Spacecraft (Illustration)
Full Resolution:     TIFF (36.59 MB)     JPEG (3.516 MB)
Add Image to Favorite List 2021-03-24 NISAR
 L-Band Synthetic Aperture Radar
S-Band Synthetic Aperture Radar
 1040x585x3
The S-band SAR arrived at JPL on March 19. The next day, technicians and engineers moved the S-SAR into the airlock to the Spacecraft Assembly Facility's High Bay 1 clean room, to be unpacked over several days in the clean room.
PIA24137:
NISAR S-Band SAR Arrival
Full Resolution:     TIFF (1.734 MB)     JPEG (66.65 kB)
Add Image to Favorite List 2021-03-16 Mars Helicopter
 3840x3255x3
This image is an illustration of NASA's Ingenuity Helicopter flying on Mars.
PIA24466:
Ingenuity Helicopter on Mars (Illustration)
Full Resolution:     TIFF (20.94 MB)     JPEG (559.6 kB)
Add Image to Favorite List 2021-02-18 Mars Mars 2020 Rover
 1920x1080x3
NASA's Perseverance rover was able to use its new Terrain-Relative Navigation technology to avoid hazards and find a safe place to land in Jezero Crater on Mars.
PIA23970:
Avoiding Hazards at Jezero Crater
Full Resolution:     TIFF (4.815 MB)     JPEG (621.2 kB)
Add Image to Favorite List 2021-02-17 Mars Mars 2020 Rover
 3000x2250x3
NASA's Mars 2020 Perseverance rover is equipped with two microphones that will capture the sounds during entry, descent, and landing, and sounds on the Martian surface.
PIA24166:
Mars 2020 Microphone Testing at JPL
Full Resolution:     TIFF (16.31 MB)     JPEG (888.7 kB)
Add Image to Favorite List 2021-02-17 Mars Mars Sample Return
 1920x1080x3
During the NASA Mars 2020 Perseverance rover mission, pristine samples of Mars rock and regolith will be collected and sealed inside collection tubes for later retrieval by the Sample Retrieval Lander mission in the late 2020s.
PIA24164:
Mars Sample Return Lander's Divert Maneuver
Full Resolution:     TIFF (2.742 MB)     JPEG (183.9 kB)
Add Image to Favorite List 2021-02-16 Mars 2020 Rover
 SuperCam
 1920x1080x3
This narrated animation shows NASA's Perseverance rover on Mars and how the rover's SuperCam laser instrument works.
PIA24426:
Animation: How Perseverance's SuperCam Works
Full Resolution:     TIFF (5.274 MB)     JPEG (194.2 kB)
Add Image to Favorite List 2021-02-02 Asteroid Psyche
 1650x1101x3
Technicians power on the main body of NASA's Psyche spacecraft, called the Solar Electric Propulsion (SEP) Chassis, at Maxar Technologies in Palo Alto, California, in November 2020.
PIA24326:
Power On: Psyche Spacecraft
Full Resolution:     TIFF (5.452 MB)     JPEG (213.5 kB)
Add Image to Favorite List 2021-01-27 Mars Mars 2020 Rover
 3840x2160x3
This graphic shows the location of four cameras and a microphone on the spacecraft for NASA's Mars 2020 Perseverance mission. These cameras will capture the entry, descent, and landing phase of the mission.
PIA24378:
Mars 2020 Camera and Microphone Location (Illustration)
Full Resolution:     TIFF (2.582 MB)     JPEG (387.4 kB)
Add Image to Favorite List 2021-01-20 Mars 2020 Rover
 SuperCam
 2540x1905x3
SuperCam's mast unit before being installed atop the Mars 2020 Perseverance rover's remote sensing mast.
PIA24208:
SuperCam Mast Unit
Full Resolution:     TIFF (11.3 MB)     JPEG (490.5 kB)
Add Image to Favorite List 2021-01-20 Mars 2020 Rover
 SuperCam
 2000x1335x3
The mast-mounted portion of Mars 2020's SuperCam awaits integration into the Perseverance rover.
PIA24207:
SuperCam is Not Seeing Red
Full Resolution:     TIFF (7.859 MB)     JPEG (297.9 kB)
Add Image to Favorite List 2021-01-20 Mars 2020 Rover
 Radar Imager for Mars' Subsurface Experiment (RIMFAX)
 4608x3456x3
The bowtie-shaped antenna for the Radar Imager for Mars' Subsurface Experiment (RIMFAX) instrument has been mounted on the underside of the Perseverance rover.
PIA24206:
Put a Bowtie on It!
Full Resolution:     TIFF (41.26 MB)     JPEG (1.417 MB)
Add Image to Favorite List 2021-01-20 Mars 2020 Rover
 Radar Imager for Mars' Subsurface Experiment (RIMFAX)
 786x401x3
The Radar Imager for Mars' Subsurface Experiment (RIMFAX) electronics box before being integrated into the Perseverance rover at NASA's Jet Propulsion Laboratory in Pasadena, California.
PIA24205:
This Gold Box to Searches for Buried Treasure
Full Resolution:     TIFF (946.1 kB)     JPEG (51.16 kB)
Add Image to Favorite List 2021-01-20 Mars 2020 Rover
 Radar Imager for Mars' Subsurface Experiment (RIMFAX)
 3456x4608x3
This image, taken in the clean room at NASA's Jet Propulsion Laboratory in Southern California, shows the Radar Imager for Mars' Subsurface Experiment (RIMFAX) electronic's box after it has been inserted into the Perseverance rover.
PIA24204:
The Parts Inside Perseverance
Full Resolution:     TIFF (43.08 MB)     JPEG (1.714 MB)
Add Image to Favorite List 2021-01-20 Mars Helicopter
 3264x2448x3
An Ingenuity team member inspects NASA's Ingenuity Mars Helicopter in one of the space simulation chambers at the agency's Jet Propulsion Laboratory in Southern California.
PIA23969:
Bottom of Ingenuity Mars Helicopter
Full Resolution:     TIFF (21.22 MB)     JPEG (481.9 kB)
Add Image to Favorite List 2021-01-20 Mars Helicopter
 3456x4608x3
The Mars Helicopter Base Station stores and routes communications between NASA's Ingenuity Mars Helicopter and mission controllers on Earth.
PIA23968:
Mars Helicopter Base Station on Perseverance Rover
Full Resolution:     TIFF (45.96 MB)     JPEG (1.651 MB)
Add Image to Favorite List 2021-01-19 Mars 2020 Rover
 Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE)
 4032x3024x3
In this image, the gold-plated Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE) Instrument shines after being installed inside the Perseverance rover.
PIA24203:
MOXIE All Tucked In
Full Resolution:     TIFF (36.5 MB)     JPEG (1.375 MB)
Add Image to Favorite List 2021-01-19 Mars 2020 Rover
 Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE)
 2016x1512x3
This engineering model of Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE) instrument is about to undergo vibration testing in a lab at the Jet Propulsion Laboratory in Pasadena, California.
PIA24202:
MOXIE Shakes it UP
Full Resolution:     TIFF (8.957 MB)     JPEG (468.1 kB)
Add Image to Favorite List 2021-01-19 Mars 2020 Rover
 Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE)
 3255x3033x3
The engineering model (EM), an almost identical twin of Mars 2020's MOXIE, is used for testing in the lab at NASA's Jet Propulsion Laboratory in Pasadena, California.
PIA24201:
MOXIE Twin During Testing
Full Resolution:     TIFF (26.12 MB)     JPEG (835.1 kB)
Add Image to Favorite List 2021-01-19 Mars 2020 Rover
 Mastcam-Z
 1172x730x3
The twin Mars 2020 Mastcam-Z cameras, shown with a pocket knife for scale, are assembled and ready for testing in this photo taken at Malin Space Science Systems, in San Diego, California.
PIA24200:
Ready for a Close Up (or a Wide Angle)
Full Resolution:     TIFF (2.337 MB)     JPEG (81.91 kB)
Add Image to Favorite List 2021-01-19 Mars 2020 Rover
 Mastcam-Z
 1064x708x3
This modern-looking geoboard adds a pop of color to the lab at Malin Space Science Systems in San Diego, California.
PIA24199:
Modern Art for Mastcam-Z
Full Resolution:     TIFF (2.261 MB)     JPEG (134.7 kB)
Add Image to Favorite List 2021-01-19 Mars 2020 Rover
 Mastcam-Z
 6000x4000x3
The Mars 2020 Mastcam-Z cameras are on a workbench during their assembly at Malin Space Science Systems in San Diego.
PIA24198:
Mastcam-Z Looking Left
Full Resolution:     TIFF (63.95 MB)     JPEG (1.898 MB)
Add Image to Favorite List 2021-01-19 Mars 2020 Rover
 Mastcam-Z
 2048x1536x3
A JPL optical technician performs a final inspection and swab cleaning of the front optics of the Mars 2020 mission's Perseverance rover Mastcam-Z cameras at the Kennedy Space Center in Florida in March 2020.
PIA24197:
Mastcam-Z Final Lens Cleaning
Full Resolution:     TIFF (7.508 MB)     JPEG (240.1 kB)
Add Image to Favorite List 2021-01-19 Mars 2020 Rover
 Mastcam-Z
 2048x1365x3
With two cameras set about 10 inches apart at the top of the Mars 2020 rover's remote sensing mast, Mastcam-Z can produce a 3D image to be viewed with 3D glasses.
PIA24196:
Mastcam-Z Can See in 3D
Full Resolution:     TIFF (7.662 MB)     JPEG (270.6 kB)
Add Image to Favorite List 2021-01-05 SPHEREx
 600x336x3
This animation shows the preliminary design for the spacecraft, including hexagonal sun shields that will help keep the instruments cool.
PIA23869:
SPHEREx Preliminary Design (Illustration)
Full Resolution:     TIFF (443.3 kB)     JPEG (21.04 kB)
Add Image to Favorite List 2020-12-22 Mars 2020 Rover
 3840x2160x3
This illustration depicts the interior of a sample tube being carried aboard the Mars 2020 Perseverance rover.
PIA24307:
Anatomy of a Sample Tube Interior
Full Resolution:     TIFF (6.336 MB)     JPEG (307.7 kB)
Add Image to Favorite List 2020-12-22 Mars 2020 Rover
 3840x2160x3
This illustration depicts the exterior of a sample tube being carried aboard the Mars 2020 Perseverance rover.
PIA24306:
Anatomy of a Sample Tube
Full Resolution:     TIFF (5.711 MB)     JPEG (238.7 kB)
Add Image to Favorite List 2020-12-22 Mars 2020 Rover
 9504x6336x3
A tray holding 39 sample tubes, each protected in a gold-colored sheath, is installed in NASA's Perseverance rover in this picture taken at the agency's Kennedy Space Center on May 21, 2020.
PIA24305:
Installing Perseverance's Sample Tubes
Full Resolution:     TIFF (151.1 MB)     JPEG (6.306 MB)
Add Image to Favorite List 2020-12-22 Mars 2020 Rover
 1600x900x1
This animation shows the data collected on a Mars 2020 sample tube using a computerized tomography (CT) scanner. Engineers working on the sample tubes used the 3D imagery to better understand the tubes' internal structure.
PIA24304:
CT Scan of Mars Sample Tube
Full Resolution:     TIFF (352.1 kB)     JPEG (32.27 kB)
Add Image to Favorite List 2020-12-22 Mars 2020 Rover
 5675x5735x3
Apollo 11 commander Neil Armstrong works with an Apollo Lunar Sample Return Container during a lunar surface simulation training exercise in Building 9, Manned Spacecraft Center in Houston, Texas.
PIA24297:
Armstrong and Rock Box
Full Resolution:     TIFF (96.51 MB)     JPEG (3.767 MB)
Add Image to Favorite List 2020-12-22 Mars 2020 Rover
 9504x6336x3
A technician working on the Mars 2020 mission takes a sample from the surface of sample tube 241, to test for contamination. The image was taken in a clean room facility at NASA's Jet Propulsion Laboratory, where the tubes were developed and assembled.
PIA24294:
Sampling Mars 2020 Sample Tube 241
Full Resolution:     TIFF (123.9 MB)     JPEG (3.97 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
An illustration of NASA's Perseverance rover landing safely on Mars. Hundreds of critical events must execute perfectly and exactly on time for the rover to land safely on Feb. 18, 2021.
PIA24319:
Perseverance Touches Down on Mars (Illustration)
Full Resolution:     TIFF (87.79 MB)     JPEG (2.642 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
NASA's Perseverance rover fires up its descent stage engines as it nears the Martian surface in this illustration.
PIA24318:
Powered Descent for Perseverance (Illustration)
Full Resolution:     TIFF (93.12 MB)     JPEG (2.135 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
In this illustration, NASA's Perseverance rover gets its first look at the Martian surface below, after dropping its heat shield just under six minutes after entry into the Mars atmosphere.
PIA24317:
Perseverance Heat Shield Separates (Illustration)
Full Resolution:     TIFF (89.02 MB)     JPEG (2.213 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
NASA's Perseverance rover deploys a supersonic parachute from its aeroshell as it slows down before landing, in this artist's illustration.
PIA24316:
Perseverance Deploys its Parachute (Illustration)
Full Resolution:     TIFF (66.38 MB)     JPEG (1.754 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
The aeroshell containing NASA's Perseverance rover guides itself towards the Martian surface as it descends through the atmosphere in this illustration.
PIA24315:
Perseverance Guides Itself Towards the Surface (Illustration)
Full Resolution:     TIFF (81.41 MB)     JPEG (2.678 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
In this illustration of its descent to Mars, the spacecraft containing NASA's Perseverance rover slows down using the drag generated by its motion in the Martian atmosphere.
PIA24314:
Perseverance Rover Decelerates in the Martian Atmosphere (Illustration)
Full Resolution:     TIFF (87.81 MB)     JPEG (1.705 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
With its heat shield facing the planet, NASA's Perseverance rover begins its descent through the Martian atmosphere in this illustration.
PIA24313:
Entering the Martian Atmosphere with the Perseverance Rover (Illustration)
Full Resolution:     TIFF (34.92 MB)     JPEG (1.294 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
This illustration shows NASA's Perseverance rover casting off its spacecraft's cruise stage, minutes before entering the Martian atmosphere.
PIA24312:
Perseverance Rover's Cruise Stage Separates (Illustration)
Full Resolution:     TIFF (60.99 MB)     JPEG (1.804 MB)
Add Image to Favorite List 2020-12-16 Mars 2020 Rover
 10240x5760x3
This illustration shows NASA's Mars 2020 spacecraft carrying the Perseverance rover as it approaches Mars. Hundreds of critical events must execute perfectly and exactly on time for the rover to land on Mars safely on Feb. 18, 2021.
PIA24311:
Perseverance Rover Approaches Mars (Illustration)
Full Resolution:     TIFF (45.22 MB)     JPEG (1.858 MB)
Add Image to Favorite List 2020-12-10 Earth Sentinel-6/Jason-CS
 1216x900x3
This graphic shows radar measurements, called waveforms, collected by the sea level instrument on Sentinel-6 Michael Freilich.
PIA24136:
Sentinel-6 Michael Freilich First Light Waveform
Full Resolution:     TIFF (2.221 MB)     JPEG (121.2 kB)
Add Image to Favorite List 2020-12-10 Earth Sentinel-6/Jason-CS
 2600x1849x3
The data in this graphic are the first sea surface height measurements from the Sentinel-6 Michael Freilich satellite (S6MF), which launched Nov. 21, 2020.
PIA24135:
Sentinel-6 Michael Freilich First Light Sea Level
Full Resolution:     TIFF (10.71 MB)     JPEG (704.9 kB)
Add Image to Favorite List 2020-12-08 Mars 2020 Rover
 Scanning Habitable Environments with Raman & Luminescence for Organics and Chemicals (SHERLOC)
 3560x1973x3
The calibration target for SHERLOC, one of the instruments aboard NASA's Perseverance Mars rover, features a slice of Martian meteorite, plus spacesuit materials, including helmet-visor material that doubles as a geocache target.
PIA24261:
SHERLOC's Calibration Target Aboard the Perseverance Mars Rover
Full Resolution:     TIFF (10.63 MB)     JPEG (504.8 kB)
Add Image to Favorite List 2020-12-08 Mars 2020 Rover
 SuperCam
 4928x3280x3
This fragment of a Martian meteorite, seen floating inside the International Space Station, is is now part of a calibration target for SuperCam, one of the instruments aboard NASA's Perseverance Mars rover.
PIA24179:
Supercam's Mars Meteorite Aboard the ISS
Full Resolution:     TIFF (41.32 MB)     JPEG (1.142 MB)
Add Image to Favorite List 2020-12-08 Mars 2020 Rover
 Mastcam-Z
 1015x960x3
Scientists use the color swatches on the primary calibration target for Mastcam-Z aboard NASA's Perseverance Mars rover. Symbols and mottos relevant to the mission are included around the target's perimeter.
PIA24178:
Mastcam-Z's Calibration Target
Full Resolution:     TIFF (2.924 MB)     JPEG (174.1 kB)
Add Image to Favorite List 2020-12-02 Lunar Trailblazer
 2048x1152x3
Peering into the Moon's permanently shadowed regions, Lunar Trailblazer will detect signatures of water ice in reflected light, and it will pinpoint the locations of micro-cold traps less than a football field in size.
PIA24161:
Lunar Trailblazer to Support NASA's Artemis Program
Full Resolution:     TIFF (4.613 MB)     JPEG (260.2 kB)
Add Image to Favorite List 2020-11-24 Mars 2020 Rover
 Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE)
 2000x1125x3
An illustration of MOXIE and its components. An air pump pulls in carbon dioxide gas from the Martian atmosphere, which is then regulated and fed to the Solid OXide Electrolyzer (SOXE), where it is electrochemically split to produce pure oxygen.
PIA24177:
Components of MOXIE (Illustration)
Full Resolution:     TIFF (2.403 MB)     JPEG (122.9 kB)
Add Image to Favorite List 2020-11-24 Mars 2020 Rover
 Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE)
 1280x720x3
Engineers lower MOXIE into the belly of NASA's Perseverance rover.
PIA24176:
Engineers Lower MOXIE into Perseverance
Full Resolution:     TIFF (2.367 MB)     JPEG (121.9 kB)
Add Image to Favorite List 2020-11-13 Mars 2020 Project
 8256x5504x3
Flight Director Matt Smith studies the data during the second post-launch trajectory correction maneuver during Perseverance's cruise to Mars.
PIA24195:
A Flight Director's Focus
Full Resolution:     TIFF (90.21 MB)     JPEG (4.09 MB)
Add Image to Favorite List 2020-11-13 Mars 2020 Project
 8256x5504x3
Propulsion Lead Rebekah Lam participates in Perseverance's second trajectory correction maneuver at NASA's Jet Propulsion Laboratory in Southern California.
PIA24194:
Propulsion Lead Checks the Tanks
Full Resolution:     TIFF (97.54 MB)     JPEG (4.452 MB)
Add Image to Favorite List 2020-11-13 Mars 2020 Project
 8256x5504x3
Matt Smith, flight director for the second Mars 2020 mission trajectory correction maneuver (TCM-2), studying the screens at NASA's Jet Propulsion Laboratory in Southern California.
PIA24193:
All Systems Go for Planned Course Correction
Full Resolution:     TIFF (111.8 MB)     JPEG (4.764 MB)
Add Image to Favorite List 2020-11-13 Mars 2020 Project
 8256x5504x3
The Mars 2020 navigation team celebrates Perseverance's nominal, or successful, trajectory correction maneuver in the Mission Support Area at NASA's Jet Propulsion Laboratory in Southern California.
PIA24192:
Celebrating a Good Day in Space
Full Resolution:     TIFF (132.5 MB)     JPEG (9.078 MB)
Add Image to Favorite List 2020-11-13 Mars 2020 Project
 8256x5504x3
Attitude Control Systems lead Chris Pong donned a dinosaur-themed mask for his participation in the Mars 2020 mission's second trajectory correction maneuver at NASA's Jet Propulsion Laboratory in Southern California.
PIA24191:
Maneuvers While Masked
Full Resolution:     TIFF (113.3 MB)     JPEG (5.596 MB)
Add Image to Favorite List 2020-11-13 Mars 2020 Project
 Mars Environmental Dynamics Analyzer (MEDA)
 1024x1024x1
One of two wind sensors springs out of the mast on NASA's Perseverance Mars rover. These sensors are part of Perseverance's weather instrumentation, called MEDA.
PIA24175:
MEDA's Wind Sensor Springs Out
Full Resolution:     TIFF (898 kB)     JPEG (78.16 kB)
Add Image to Favorite List 2020-11-13 Mars 2020 Project
 Mars Environmental Dynamics Analyzer (MEDA)
 4608x3456x3
SkyCam is a sky-facing camera aboard NASA's Perseverance Mars rover. As part of MEDA, the rover's set of weather instruments, SkyCam will take images and video of clouds passing in the Martian sky.
PIA24174:
Perseverance Rover's SkyCam
Full Resolution:     TIFF (36 MB)     JPEG (1.161 MB)
Add Image to Favorite List 2020-11-10 Mars 2020 Project
 1545x1902x3
An electrical cable can be seen snaking its way along insulation material in this in-flight image of the interior of the Mars 2020 spacecraft on its way to the Red Planet.
PIA24233:
Mars 2020 Showing Some Inflight Heat
Full Resolution:     TIFF (5.616 MB)     JPEG (455.8 kB)
Add Image to Favorite List 2020-11-05 Sentinel-6/Jason-CS
 1281x1920x3
Technicians and engineers working on the Sentinel-6 Michael Freilich satellite pose in front of the spacecraft in its protective nosecone, or payload fairing, at Vandenberg Air Force Base in California.
PIA24134:
Sentinel-6 Michael Freilich Spacecraft Team and Fairing
Full Resolution:     TIFF (6.75 MB)     JPEG (370.1 kB)
Add Image to Favorite List 2020-11-05 Sentinel-6/Jason-CS
 1281x1920x3
The Sentinel-6 Michael Freilich satellite is encapsulated in a protective nosecone, or payload fairing, at Vandenberg Air Force Base in California. The fairing will sit atop a SpaceX Falcon 9 rocket that will launch the satellite into Earth orbit.
PIA24133:
Sentinel-6 Michael Freilich Encapsulated
Full Resolution:     TIFF (7.381 MB)     JPEG (395.7 kB)
Add Image to Favorite List 2020-10-27 Mars 2020 Project
 5334x3000x3
NASA's Mars 2020 Perseverance rover reached its halfway point — 146.3 million miles (235.4 million kilometers) — on its journey to Jezero Crater on Oct. 27, 2020, at 1:40 p.m. PDT (4:40 EDT).
PIA24232:
Perseverance Rover at Halfway Point
Full Resolution:     TIFF (7.135 MB)     JPEG (462.7 kB)
Add Image to Favorite List 2020-10-27 Mars 2020 Project
 3360x1700x3
This illustration of the Mars 2020 spacecraft in interplanetary space was generated using imagery from NASA's Eyes on the Solar System. The image is from the mission's midway point between Earth and Mars.
PIA24231:
Mars 2020 Spacecraft Mid-Cruise (Illustration)
Full Resolution:     TIFF (1.605 MB)     JPEG (214.8 kB)
Add Image to Favorite List 2020-10-22 Mars 2020 Project
 3672x2448x3
MEDLI2 sensors are installed on the Mars 2020 heat shield and back shell prior that will protect NASA's Perseverance rover on its journey to the surface of Mars.
PIA23989:
MEDLI2 Onboard Mars 2020 Spacecraft
Full Resolution:     TIFF (23.31 MB)     JPEG (889.3 kB)
Add Image to Favorite List 2020-10-19 Mars 2020 Rover
 Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE)
 6354x4539x3
This nickel-alloy heat exchanger is among several that were 3D printed for MOXIE, an instrument aboard NASA's Perseverance Mars rover.
PIA24171:
Close-up of 3D printed MOXIE Heat Exchanger
Full Resolution:     TIFF (47.22 MB)     JPEG (1.691 MB)
Add Image to Favorite List 2020-10-19 Mars 2020 Rover
 864x1152x3
This video clip shows a 3D printing technique where a printer head scans over each layer of a part, blowing metal powder which is melted by a laser.
PIA23972:
Video of 3D printing at JPL
Full Resolution:     TIFF (1.942 MB)     JPEG (56.39 kB)
Add Image to Favorite List 2020-10-19 Mars 2020 Rover
 Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE)
 677x479x3
This X-ray image shows the interior of a 3D-printed heat exchanger in Perseverance's MOXIE instrument. X-ray images like these are used to check for defects within parts.
PIA24100:
X-ray Image of 3D-Printed MOXIE Part
Full Resolution:     TIFF (158.8 kB)     JPEG (18.57 kB)
Add Image to Favorite List 2020-10-16 Sentinel-6/Jason-CS
 1920x1440x3
The Sentinel-6 Michael Freilich satellite undergoes final preparations in a clean room at Vandenberg Air Force Base in California for an early November launch.
PIA24131:
Sentinel-6 Michael Freilich processing
Full Resolution:     TIFF (7.278 MB)     JPEG (412.3 kB)
Add Image to Favorite List 2020-10-15 Mars 2020 Rover
 3000x4500x3
This illustration depicts five major components of the Mars 2020 spacecraft.
PIA24128:
Mars 2020 Expanded Spacecraft Illustration
Full Resolution:     TIFF (10.23 MB)     JPEG (789.7 kB)
Add Image to Favorite List 2020-10-13 DuAxel Project
 6016x4016x3
The two-wheeled Axel descends the slope while tethered to its counterpart anchored above the slope. The tether serves as a climbing rope of sorts while also providing power and a means of communication.
PIA24110:
The Tethered Axel Autonomously Descends a Rocky Slope
Full Resolution:     TIFF (68.03 MB)     JPEG (2.271 MB)
Add Image to Favorite List 2020-10-13 DuAxel Project
 4752x3168x3
During the same field test, the DuAxel rover separates into two single-axled robots so that one can rappel down a slope too steep for conventional rovers.
PIA24109:
DuAxel Undocks a Tethered Axel to Explore a Steep Slope
Full Resolution:     TIFF (42.6 MB)     JPEG (2.149 MB)
Add Image to Favorite List 2020-10-13 DuAxel Project
 4240x2832x3
The DuAxel rover is seen here participating in field tests in the Mojave Desert. The four-wheeled rover is composed of two Axel robots. One part anchors itself in place while the other uses a tether to explore otherwise inaccessible terrain.
PIA24108:
The DuAxel Rover During a Field Test in California's Mojave Desert
Full Resolution:     TIFF (33.87 MB)     JPEG (1.441 MB)
Add Image to Favorite List 2020-10-08 Mars 2020 Rover
 Radar Imager for Mars' Subsurface Experiment (RIMFAX)
 1920x1080x3
Highlighted in blue in this visualization, the RIMFAX instrument's antenna is externally mounted underneath the MMRTG (the rover's nuclear battery) on the back of Perseverance.
PIA24049:
RIMFAX Location on NASA's Perseverance Rover (Illustration)
Full Resolution:     TIFF (1.82 MB)     JPEG (118.9 kB)
Add Image to Favorite List 2020-10-08 Mars 2020 Rover
 Radar Imager for Mars' Subsurface Experiment (RIMFAX)
 3648x2432x3
A test model of the RIMFAX instrument, aboard the trailer behind the snow mobile, undergoes field testing in Svalbard, Norway.
PIA24048:
Testing RIMFAX for NASA's Perseverance Rover
Full Resolution:     TIFF (13.07 MB)     JPEG (526.7 kB)
Add Image to Favorite List 2020-10-08 Mars 2020 Rover
 Radar Imager for Mars' Subsurface Experiment (RIMFAX)
 1067x600x3
Perseverance's Radar Imager for Mars' Subsurface Experiment (RIMFAX) uses radar waves to probe the ground, revealing the unexplored world that lies beneath the Martian surface.
PIA24047:
RIMFAX at Work on NASA's Perseverance (Illustration)
Full Resolution:     TIFF (1.706 MB)     JPEG (124.5 kB)
Add Image to Favorite List 2020-10-02 Sentinel-6/Jason-CS
 3840x2160x3
This illustration shows the rear of the Sentinel-6 Michael Freilich spacecraft in orbit above Earth with its deployable solar panels extended.
PIA24107:
The Rear of the Sentinel-6 Michael Freilich Satellite (Illustration)
Full Resolution:     TIFF (9.466 MB)     JPEG (452.9 kB)
Add Image to Favorite List 2020-10-02 Sentinel-6/Jason-CS
 3840x2160x3
This illustration shows the front of the Sentinel-6 Michael Freilich spacecraft in orbit above Earth with its deployable solar panels extended.
PIA24106:
The Front of the Sentinel-6 Michael Freilich Satellite (Illustration)
Full Resolution:     TIFF (8.732 MB)     JPEG (425.7 kB)
Add Image to Favorite List 2020-10-02 Sentinel-6/Jason-CS
 3840x2160x3
In this illustration, the Sentinel-6 Michael Freilich spacecraft, the world's latest sea-level satellite, orbits Earth with its deployable solar panels extended.
PIA24105:
The Sentinel-6 Michael Freilich Satellite Orbits Earth (Illustration)
Full Resolution:     TIFF (12.34 MB)     JPEG (570.6 kB)
Add Image to Favorite List 2020-10-01 Mars Helicopter
 3840x3255x3
This illustration depicts Mars Helicopter Ingenuity during a test flight on Mars.
PIA24127:
Helicopter Above Perseverance on Mars
Full Resolution:     TIFF (13.9 MB)     JPEG (689 kB)
Add Image to Favorite List 2020-09-28 Mars 2020 Rover
 1600x900x3
Visible both in the inset photograph on the upper left and near the center of NASA's Perseverance Mars rover in this illustration is the palm-size dome called the Laser Retroreflector Array (LaRA).
PIA24097:
Perseverance's Laser Retroreflector (Illustration)
Full Resolution:     TIFF (4.016 MB)     JPEG (228 kB)
Add Image to Favorite List 2020-09-25 Sentinel-6/Jason-CS
 1736x1099x3
A shipping container containing the Sentinel-6 Michael Freilich satellite is transported on a truck to the SpaceX payload processing facility at Vandenberg Air Force Base after landing in California on Sept. 24, 2020.
PIA24104:
Sentinel-6 Michael Freilich Transported for Payload Processing
Full Resolution:     TIFF (4.04 MB)     JPEG (181.6 kB)
Add Image to Favorite List 2020-09-25 Sentinel-6/Jason-CS
 1228x706x3
A shipping container containing the Sentinel-6 Michael Freilich satellite is removed from an aircraft at Vandenberg Air Force Base in California on Sept. 24, 2020, after its two-day journey from an IABG engineering facility near Munich, Germany.
PIA24103:
Sentinel-6 Michael Freilich Arrives at Vandenberg Air Force Base
Full Resolution:     TIFF (2.091 MB)     JPEG (96.16 kB)
Retrieve Previous Set  Jump to a Previous Set   Jump to a Previous Set   Jump to a Previous Set   Current Set   Jump to a Following Set   Jump to a Following Set   Jump to a Following Set   Jump to a Following Set   Jump to a Following Set   Jump to a Following Set   Retrieve Next Set 
 1-100   101-200   201-300   301-400   401-500   501-600   601-700   701-800   801-900   901-1000 
Currently displaying images: 301 - 400 of 1962