PIA23167: Embedded Moons Sculpt Saturn's Rings
 Target Name:  Saturn
 Is a satellite of:  Sol (our sun)
 Mission:  Cassini-Huygens
 Spacecraft:  Cassini Orbiter
 Instrument:  Imaging Science Subsystem 
 Product Size:  2328 x 1650 pixels (w x h)
 Produced By:  Cassini Imaging Team
 Full-Res TIFF:  PIA23167.tif (7.24 MB)
 Full-Res JPEG:  PIA23167.jpg (557.1 kB)

Click on the image above to download a moderately sized image in JPEG format (possibly reduced in size from original)

Original Caption Released with Image:

Click here for larger image of PIA23167
Figure 1
Click on image for larger version

This enhanced-color image mosaic shows Daphnis, one of the moons embedded in Saturn's rings, in the Keeler gap on the sunlit side of the rings. Daphnis is seen kicking up three waves in the gap's outer edge. Three wave crests of diminishing sizes trail the moon. In each successive crest, the shape of the wave changes as the ring particles within the crest interact and collide with each other. A thin strand of ring material to the lower left of Daphnis is newly visible in this image, and there are intricate features that also hadn't been previously observed in the third wave crest downstream (see Figure 1).

Cassini was at a very shallow angle above the rings (only about 15 degrees) when this image was taken. The resulting foreshortening makes it difficult to tell the difference in this image between features representing vertical structure and those representing radial, or outward from Saturn, structure within the ring plane. Nonetheless, Cassini imaging scientists have determined that the waves in the gap are largely vertical; compare this to the shadows that they were seen to cast during equinox (see PIA11547, PIA11653, PIA11655 and PIA11656). The thin strand of material is also probably vertical. Daphnis itself is actually five times smaller than the width of the gap, but it looks bigger here because of the foreshortening.

The color in this image comes from using Imaging Science Subsystem images obtained by applying different filters to "paint" color onto the black-and-white version of this view previously released as PIA17212. The color of the ring region outward of the Keeler Gap (the "trans-Keeler region," in the lower portion of this image) is noticeably different from the color inward from the gap (upper portion of this image). In visible light, this color difference sharply coincides with the gap, while near-infrared Visible and Infrared Mapping Spectrometer (VIMS) images show some bleeding of the trans-Keeler region into the region inward from the gap. The reasons for the sharp change in color are mysterious, but they probably have more to do with a change in particle sizes and other properties than with a change in composition.

The images in this mosaic were taken in visible light, using the Cassini spacecraft narrow-angle camera at a distance of approximately 17,000 miles (28,000 kilometers) from Daphnis and at a Sun-Daphnis-spacecraft angle, or phase angle, of 71 degrees (for the color images, 58 degrees). Image scale is 550 feet (170 meters) per pixel.

The image was produced by Tilmann Denk at Freie Universität in Berlin.

Figure 1 shows a closeup of the third wave crest (toward the far left in the color image) focusing on detail scientists hadn't seen before, with multiple strands of ring material visible. The image shows how the ring material behaves after losing the structure Daphnis triggered and goes back to interacting with itself.

The ribbon of material that appears to be protruding into the gap in the right-hand portion of the image is probably actually soaring above the ring plane. Toward the left-hand part of the image, that same ribbon of material dives below the ring plane and becomes obscured by the main part of the rings, which is why it disappears from view.

The image shown in Figure 1 was taken in visible light, using the Cassini spacecraft narrow-angle camera at a distance of approximately 15,000 miles (23,000 kilometers) from Daphnis and at a Sun-Daphnis-spacecraft angle, or phase angle, of 94 degrees. Image scale is 520 feet (160 meters) per pixel. Unlike the main image, the image in Figure 1 was taken on the unlit side of the rings.

The Cassini mission is a cooperative project of NASA, ESA (the European Space Agency) and the Italian Space Agency. The Jet Propulsion Laboratory, a division of Caltech in Pasadena, manages the mission for NASA's Science Mission Directorate in Washington. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging operations center is based at the Space Science Institute in Boulder, Colorado.

For more information about the Cassini-Huygens mission visit https://solarsystem.nasa.gov/cassini. The Cassini imaging team homepage is at http://ciclops.org.

Image Credit:
NASA/JPL-Caltech/Space Science Institute

Image Addition Date:
2019-06-13