PIA18398: NASA Radio Installed in Europe's Next Mars Orbiter
 Mission:  ExoMars
 Instrument:  ExoMars Trace Gas Orbiter 
 Product Size:  1075 x 1434 pixels (w x h)
 Produced By:  ESA./NASA 
 Full-Res TIFF:  PIA18398.tif (4.627 MB)
 Full-Res JPEG:  PIA18398.jpg (218.8 kB)

Click on the image above to download a moderately sized image in JPEG format (possibly reduced in size from original)

Original Caption Released with Image:

This June 2014 image from the clean room at Thales Alenia Space, in Cannes, France, shows ongoing assembly of the European Space Agency's ExoMars Trace Gas Orbiter, including the first of the orbiter's two Electra UHF relay radios provided by NASA. The Electra radio is dark box on the blue-rimmed panel in the foreground.

ESA's ExoMars Trace Gas Orbiter will study the Martian atmosphere for the presence of methane and other gases that may be present in small concentrations. It will also deploy the ESA Schiaparelli Mars landing demonstration craft and provide communications support for robotic missions on the surface of Mars. Relay of information from Mars-surface craft to Mars orbiters, then from Mars orbit to Earth, enables receiving much more data from the surface missions than would otherwise be possible.

The Electra radio design from NASA's Jet Propulsion Laboratory, Pasadena, California, includes special features for relay use between an orbiter and a rover or stationary lander. For example, it can actively adjust the data rate during a communication session -- slower when the orbiter is near the horizon from the surface robot's perspective, faster when it is overhead. NASA's Curiosity Mars rover and Mars Reconnaissance Orbiter already use Electra technology for relay of data. A NASA orbiter currently on the way to Mars, the Mars Atmosphere and Volatile Evolution (MAVEN) spacecraft, also carries an Electra radio.

For more about the ExoMars Trace Gas Orbiter, visit http://exploration.esa.int/mars/46475-trace-gas-orbiter/.

Image Credit:

Image Addition Date: